Products Products Catalog ROMER Products All
Browse
90-degree Probe 51682-12
90º 6 mm ruby tip probe (approximate working length 158 mm (6.22 in)).
Ball Probe, 15 mm, for 7 axis arm 52529-06A
15 mm Ball Probe for 7 Axis Arms - carbon graphite shaft for use in the center (13 pin) location of the scanning head wrist assembly.
Ball Probe, Steel, 15 mm 51678-13 to 15
15 mm Steel Ball Probe. Working lengths from 50 mm to 185 mm (2 to 7.3 in).
Battery Charger CH5000A
Battery Charger (United States) - not Asia.
Battery ND2017
7.2 volt lithium ion battery for INFINITE arms.
Battery Pack 32121-01
Battery Pack - powers STINGER and 3000i series arms
Brunson Mounting Plate Adapter 31660-1
Brunson mounting plate assembly - direct mounting of STINGER series arms (square, 4-hole pattern).
Brunson Stand, Fixed Height 3219x
Brunson model 230-F-24. 609 mm (24 in) fixed height. Direct mount of INFINITE arm, other arms require mounting adapter #31660.
32191 is model 230-F-36, 914 mm (36 in) height.
Brunson Stand, large 30051
Model 230. Height adjusts from 1090 to 1700 mm (43 to 67 in). Point feet. Stand weighs 118 kg (260 lb) Direct mount of INFINITE and other arms requires mounting adapter #31660.
Brunson Stand, portable 30826
Brunson Stand, Carbon Graphite Portable Model for INFINITE Arms - height adjusts from 29.25" to 55.25" (743 to 1403mm). Point feet. Stand weighs 32lbs (14.5kg). Travel case #32989 sold separately.
Brunson Stand, small 30050
Model 231. Small. Height adjusts from 777 - 1066 mm. Point feet. Direct mount of INFINITE arm, other arms requires Mounting Adapter #31660.
Calibration Probe Sphere 32099-2
Calibration Probe Sphere with Magnetic Mount - 25 mm (1 in), used to calibrate the Power Probe.
Calibration Sphere 20688
25.4 mm (1 in) calibration probe sphere - used to calibrate the PowerProbe.
Center Punch Probe 30010-3
Approximate working length 116.5 mm (4.6 in).
Certified Length Standard 30031
25.4 mm (1 in) tee for 25-, 75-, 100-, and 150-mm ( .98-, 2.75-, 7.83-,5.9-in) tube probes.
Certified Length Standard 30032-1
Certified Length Standard 30237-1
30237-1 Certified Length Standard. 25.4 mm (1 in) tee for 6 mm (.24 in) tube probes.
Certified Length Standard 32377
32377 Certified Length Standard 304 mm (12 in). (Use on 1.2 m (4 ft) arm only).
Conical Seat 71292
Conical seat for a GridLOK installation.
Conical Seat Cover 71345
A cover for conical seats used in the GridLOK system - prevents dirt and oil contamination.
Demo Block 71205
Edge Probe 51678
Edge probe (approximate working length 51.5 mm (2 in)).
Foot Pedal Switch 32054
An external switch that plugs into the rear of either the 3000i or STINGER series arms. Requires a female-to-female gender adapter for STINGER arms.
Foot Pedal Switch 32753
Foot Petal - for INFINITE arms (for use with USB camera).
GridLOK 51460
GridLOK 4x6 m (13x19 ft) installation in concrete slab, calibration, start-up, GridLOK Positioning Software, dongle and 51809 portable stand.
Hexagon Demo Block 720145
INFINITE Mag Base 52458
INFINITE magnetic base. Includes 3 magnets.
Laser Tracker Ball Probe 33586
Laser Tracker Ball Probe - 38 mm (1.5 in) Diameter Ball.
Laser Tracker Ball Probe 33587
Laser Tracker Ball Probe - 22.2 mm (.875 in) diameter ball.
Laser Tracker Ball Probe 33588
Laser Tracker Ball Probe - 12.7 mm (0.5 in) diameter ball.
|
